home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Columbia Kermit
/
kermit.zip
/
newsgroups
/
misc.19950929-19951130
/
000032_news@columbia.edu_Wed Oct 4 06:25:43 1995.msg
< prev
next >
Wrap
Internet Message Format
|
2020-01-01
|
2KB
Received: from apakabar.cc.columbia.edu by watsun.cc.columbia.edu with SMTP id AA01524
(5.65c+CU/IDA-1.4.4/HLK for <kermit.misc@watsun.cc.columbia.edu>); Thu, 5 Oct 1995 23:01:16 -0400
Received: by apakabar.cc.columbia.edu id AA09365
(5.65c+CU/IDA-1.4.4/HLK for kermit.misc@watsun); Thu, 5 Oct 1995 23:01:15 -0400
Path: news.columbia.edu!sol.ctr.columbia.edu!news.uoregon.edu!cuhknntp!hpg30a.csc.cuhk.hk!agate!spool.mu.edu!howland.reston.ans.net!tank.news.pipex.net!pipex!news.mathworks.com!newsxfer.itd.umich.edu!news.flint.umich.edu!news.gmi.edu!msunews!netnews.upenn.edu!cronkite.ocis.temple.edu!cmi.hahnemann.edu!earth.medcolpa.edu!schoffstall
From: schoffstall@earth.medcolpa.edu
Newsgroups: comp.protocols.kermit.misc
Subject: Kermit 3.14 under Win95 problem
Date: 4 Oct 95 10:25:43 EDT
Organization: Hahnemann University
Lines: 17
Message-Id: <1995Oct4.102543@earth.medcolpa.edu>
Nntp-Posting-Host: earth.medcolpa.edu
Apparently-To: kermit.misc@watsun.cc.columbia.edu
I'm running Kermit 3.14 under Win95. It runs fine when you shut
down Win95 and run a DOS session, but it won't run in a DOS box as a
Win95 process, apparently because it can't detect the port. After it
executes MSCUSTOM.INI, I get the message:
?Warning: unknown hardware for port. Using the Bios as BIOS1
Unimplemented speed
?Cannot use RTS/CTS on non-UART parts
This is on a 486. On a Pentium box, I get this message only
*part* of the time. Huh?!? If I run Kermit in a DOS box, I get the error
message, leave Kermit for DOS, then run Kermit *again*, it correctly
detects the port. But not on the 486.
What's going on here? How can it be fixed?
-- John